Non Asbestos Gland Packings (PTFE, Graphite, Carbon, Kevlar)

(STYLE - 11 & 12) PTFE UNIVERSAL SOFT & FLEXIBLE PACKINGS

PTFE PUTTY / PTFE GRAPHITE PUTTY
Constructions: Extruded soft packing made form PTFE & High Temperature Lubricant. Available in round & square section
Applications: Suitable for pumps, valves & many other static applications Dueto the chemical inertness of PTFE it can be used with all substances.Offers excellent sealing when used in place of gaskets or jointingin flanges in almost all type of industries
Technical Parameters: Temperature - 100 o C to +260 o C
pH Range 0 - 14
Pressure 20 Kg/Cm2
Shaft Speed 4 Meters/Second

Installation Instructions

Calculation Help


RECOMMENDED SERVICE MEDIAS

Water
Acidic Gas
Concentrated Alkalis
Mineral Oil & Grease
Steam
Volatile Hydrocarbon
Solvents
Paint Varnish
X
Hydrogen
Neutral Solutions
Amines & Nitrates
Bitumen
Oxygen
Concentrated Acids
Synthetic oils
Abrasive media
Recommended
X
Limited Recommendable

(STYLE - 13) PTFE + GRAPHITE SOFT PACKINGS

(P T F E + G R A P H I T E S O F T P A C K I N G S )
Constructions: An extremely low friction extruded soft and dense packing madefrom a special grade of PTFE, graphite and high temperaturelubricant.
Applications: The self-lubricating packing has excellent thermal and chemicalresistance. It reduces friction to shafts and resists gas permeation.It is used in pumps, valves, stirring equipments and static application for use with acids, dyes, solvents, adhesives and abrasive media.  It is recommended to use rings of Style 62 or Style 71 on both ends.
Technical Parameters: Temperature - 100o C to +300 o C
pH Range 0 - 14
Pressure 100 Kg/Cm2
Shaft Speed 12 Meters/Second

Installation Instructions

Calculation Help





RECOMMENDED SERVICE MEDIAS

Water
Acidic Gas
Concentrated Alkalis
Mineral Oil & Grease
Steam
Volatile Hydrocarbon
Solvents
Paint Varnish
X
Hydrogen
Neutral Solutions
Amines & Nitrates
Bitumen
Oxygen
Concentrated Acids
Synthetic oils
Abrasive media
Recommended
X
Limited Recommendable

(STYLE - 14) PTFE VALVE SEAL

Valve Seal
Constructions: Valve Seal is provided with double construction of 100% PTFE core with spiral wrapping of PTFE tape.
Applications:
The core fills all voids and confirms to uneven spindles and flanges while the spiral wrapping of PTFE Tape prevents extrusion at both ends of the spindle. Valve seal is chemically inert, Self -lubricating and does not adhere or harden on use. It is widely recommended for use on valves in various industries for obtaining practically zero Leakage Can also be used in place of gaskets in flanged joint.
Technical Parameters: Temperature - 100 o C to +260 o C
pH Range 0 - 14
Pressure 200 Kg/Cm2
Shaft Speed --

Installation Instructions

Calculation Help


RECOMMENDED SERVICE MEDIAS

Water
Acidic Gas
Concentrated Alkalis
Mineral Oil & Grease
Steam
Volatile Hydrocarbon
Solvents
Paint Varnish
Hydrogen
Neutral Solutions
Amines & Nitrates
Bitumen
Oxygen
Concentrated Acids
Synthetic oils
Abrasive media
Recommended
X
Limited Recommendable

(STYLE - 41) PURE EXPANDED GRAPHITE PACKING

PURE EXPANDED GRAPHITE PACKING
Constructions: Diagonally braided from pure expanded flexible graphite yarn.
Applications:
Very flexible and supple packing, excellent alternative to pre- formed graphite-rings. The benefits of this packing are low friction and excellent thermal conductivity. It can be used with steam, water, oils, alkalis, acids, solvents, paints varnishes on pumps and valves in high temperature and high pressure environments prevailing in power plants, boiler house, refineries, steel mills, petrochemicals industries etc.
Technical Parameters: Temperature - 240 o C to +650 o C
pH Range 0 - 14
Pressure 300 Kg/Cm2
Shaft Speed 25 Meters/Second

Installation Instructions

Calculation Help


RECOMMENDED SERVICE MEDIAS

Water
Acidic Gas
Concentrated Alkalis
Mineral Oil & Grease
Steam
Volatile Hydrocarbon
Solvents
Paint Varnish
Hydrogen   Neutral Solutions
Amines & Nitrates
X
Bitumen  
Oxygen
Concentrated Acids
Synthetic oils
Abrasive media  
Recommended
X
Limited Recommendable

(STYLE - 42) PURE CARBON PACKING

PURE CARBON PACKING
Constructions: High quality carbon fibre impregnated with graphite and an inert lubricant.
Applications:
This packing is extremely flexible and has excellent heat dissipat- ing properties and very low coefficient of friction. It can be used for sealing boiler feed pumps, valves, mixers etc. in pulp & paper, chemical, power plants pharmaceutical Industries etc.
Technical Parameters: Temperature - 240 o C to +600 o C
pH Range 0 - 14
Pressure 200 Kg/Cm2
Shaft Speed 20 Meters/Second

Installation Instructions

Calculation Help


RECOMMENDED SERVICE MEDIAS

Water
Acidic Gas
Concentrated Alkalis
Mineral Oil & Grease
Steam
Volatile Hydrocarbon
Solvents
Paint Varnish
Hydrogen   Neutral Solutions
Amines & Nitrates   Bitumen  
Oxygen
Concentrated Acids
Synthetic oils
Abrasive media  
Recommended
X
Limited Recommendable

(STYLE - 51) PTFE PACKING + HIGH TEMPERATURE LUBRICANT

PTFE PACKING + HIGH - TEMPERATURE�LUBRICANT
Constructions: High tensile yarn made from a special grade PTFE, impregnated with PTFE dispersion and lubricated with inert high temperature lubricant.
Applications:
This packing has particular characteristics such as low coefficient of friction and excellent tightness, making it suitable for rotary, reciprocating and static applications, It is widely used in all type of industries where purity and safety are vital criteria, such as food processing, pharmaceutical, chemical industries etc.
Technical Parameters: Temperature - 200 o C to +260 o C
pH Range 0 - 14
Pressure 100 Kg/Cm2
Shaft Speed 8 Meters/Second

Installation Instructions

Calculation Help


RECOMMENDED SERVICE MEDIAS

Water
Acidic Gas
Concentrated Alkalis
Mineral Oil & Grease
Steam
Volatile Hydrocarbon
Solvents
Paint Varnish
Hydrogen
X
Neutral Solutions
Amines & Nitrates   Bitumen
X
Oxygen
Concentrated Acids
Synthetic oils
Abrasive media
X
Recommended
X
Limited Recommendable

(STYLE - 52) PTFE PACKING + PTFE DISPERSION

PTFE�PACKING + PTFE�DISPERSION
Constructions: High tensile yarn made of special grade PTFE and impregnated with PTFE dispersion.
Applications:
This packing is mainly recommended where lubricant is not to be used due to danger of combustion. It is also used in pumps having low shaft speed and equipments in handling hazardous & corrosive chemicals. PTFE being chemically inert, can be used with almost all chemicals.
Technical Parameters: Temperature - 200 o C to +260 o C
pH Range 0 - 14
Pressure 100 Kg/Cm2
Shaft Speed 5 Meters / Second

Installation Instructions

Calculation Help


RECOMMENDED SERVICE MEDIAS

Water
Acidic Gas
Concentrated Alkalis
Mineral Oil & Grease
Steam
Volatile Hydrocarbon
Solvents
Paint Varnish
Hydrogen
Neutral Solutions
Amines & Nitrates
Bitumen
X
Oxygen
Concentrated Acids
Synthetic oils
Abrasive media
X
Recommended
X
Limited Recommendable

(STYLE - 61) PTFE + GRAPHITE PACKING

P T F E + GRAPHITE PACKING
Constructions: PTFE yarn coated with graphite and lubricated with an inert high temperature lubricant.
Applications: This packing is suitable for high-speed rotary application. It can be used in contact with most media including the most aggressives. Also suitable for oxygen, paints, lacquers, varnishes. This packing is used in chemicals, petrochemicals, paper & pulp industries textiles industries power plants, etc
Technical Parameters: Temperature - 240 o C to +300 o C
pH Range 0 - 14
Pressure 300 Kg/Cm2
Shaft Speed 20 Meters / Second

Installation Instructions

Calculation Help


RECOMMENDED SERVICE MEDIAS

Water
Acidic Gas
Concentrated Alkalis
Mineral Oil & Grease
Steam
Volatile Hydrocarbon
Solvents
Paint Varnish
Hydrogen
Neutral Solutions
Amines & Nitrates
Bitumen
X
Oxygen
Concentrated Acids
Synthetic oils
Abrasive media
X
Recommended
X
Limited Recommendable

(STYLE - 62) PTFE + GRAPHITE PACKING

Constructions: A special grade of PTFE bonded with quality graphite and lubricated with an inert high temperature lubricant
Applications:
This packing is ideally well suited for high peripheral speeds and temperature. It can be used in pumps, valves, mixers, reactors, agitators etc. This self-lubricating packing can be safely used in almost all chemical applications including the most aggressive widely used in refineries, petrochemicals, fertilizers, textiles industries, power plants, etc.
Technical Parameters: Temperature - 240 o C to +300 o C
pH Range 0 - 14
Pressure 300 Kg/Cm<sup>2</sup>
Shaft Speed 25 Meters / Second

Installation Instructions

Calculation Help


RECOMMENDED SERVICE MEDIAS

Water
Acidic Gas
Concentrated Alkalis
Mineral Oil & Grease
Steam
Volatile Hydrocarbon
Solvents
Paint Varnish
Hydrogen
Neutral Solutions
Amines & Nitrates
Bitumen
X
Oxygen
Concentrated Acids
Synthetic oils
Abrasive media
X
Recommended
X
Limited Recommendable

(STYLE - 71) ARAMIDE (KEVLAR®) PACKINGS

ARAMID PACKING
Constructions: High strength organic aramide (aromatic polyamide) synthetic yarn impregnated with PTFE & lubricated with a special high temperature lubricant.
Applications: The high strength of the yarn and its abrasion resistance make it ideal for use with abrasive sand, slurry, gritty media, sludge & sewerage handling equipments. It is used in pulp and paper, chemical, petrochemicals, pharmaceuticals, sugar, food industries power plants, etc. Also used as anti extrusion rings in combination with other softer packing.
Technical Parameters: Temperature - 240 o C to +260 o C
pH Range 2 - 12
Pressure 250 Kg/Cm2
Shaft Speed 12 Meters / Second

Installation Instructions

Calculation Help


RECOMMENDED SERVICE MEDIAS

Water
Acidic Gas
X
Concentrated Alkalis   Mineral Oil & Grease
Steam
Volatile Hydrocarbon   Solvents
X
Paint Varnish  
Hydrogen   Neutral Solutions
Amines & Nitrates
X
Bitumen
Oxygen
Concentrated Acids   Synthetic oils
Abrasive media
Recommended
X
Limited Recommendable

(STYLE - 81) PTFE & PTFE GRAPHITE COMBINATION PACKING

PTFE & PTFE GRAPHITE COMBINATION PACKING
Constructions: Alternately braided packing made from a high - grade PTFE yarn and specially developed graphite bonded PTFE yarn.
Applications: The alternate braiding of this packing allows graphite bonded PTFE yarn to come in direct contact with the rotating object, making it ideal for use in high speed applications. It is widely used in chemical and petrochemical industries for oils, concentrated acids corrosive gases etc.
Technical Parameters: Temperature -200 o C to +260 o C
pH Range 0 - 14
Pressure 200 Kg/Cm2
Shaft Speed 15 Meters / Second

Installation Instructions

Calculation Help


RECOMMENDED SERVICE MEDIAS

Water
Acidic Gas
Concentrated Alkalis
Mineral Oil & Grease
Steam
Volatile Hydrocarbon
Solvents
Paint Varnish
Hydrogen
X
Neutral Solutions
Amines & Nitrates
Bitumen
X
Oxygen
Concentrated Acids
Synthetic oils
Abrasive media
X
Recommended
X
Limited Recommendable

(STYLE - 82) PTFE & ARAMID COMBINATION PACKING

PTFE & ARAMID COMBINATION PACKING
Constructions: Combination packing made of a high grade PTFE yarn with aramide corners.
Applications:
A non toxic and dimensionally stable packing suitable for corrosive chemicals and abrasive media. This packing is also used as an Anti-extrusion rings as it can withstand high pressure in rotary as well as reciprocating applications. Widely used in food and pharma industries, dairies, refineries, fertilizer plants, etc.
Technical Parameters: Temperature - 200 o C to +260 o C
pH Range 2 - 12
Pressure 180 Kg/Cm2
Shaft Speed 12 Meters / Second

Installation Instructions

Calculation Help


RECOMMENDED SERVICE MEDIAS

Water
Acidic Gas
X
Concentrated Alkalis   Mineral Oil & Grease
Steam
Volatile Hydrocarbon
X
Solvents
Paint Varnish  
Hydrogen
X
Neutral Solutions
Amines & Nitrates
Bitumen
Oxygen
Concentrated Acids   Synthetic oils
Abrasive media
Recommended
X
Limited Recommendable

(STYLE - 83) PTFE + GRAPHITE & ARAMIDE COMBINATION PACKING

PTFE GRAPHITE & ARAMID COMBINATION PACKING
Constructions: A high quality combination packing of graphite bonded PTFE yarn with aramide concerns.
Applications: This packing has good sliding properties and thermal conductivity, making it an excellent packing option for high pressure pumps with sliding velocity. Aramide yarn corners prevent gap extrusion in high pressure & high temperature applications. It is widely used in applications involving abrasive media.
Technical Parameters: Temperature -240 o C to +260 o C
pH Range 0 - 12
Pressure 200 Kg/Cm2
Shaft Speed 20 Meters/Second

Installation Instructions

Calculation Help


RECOMMENDED SERVICE MEDIAS

Water
Acidic Gas
X
Concentrated Alkalis   Mineral Oil & Grease
Steam
Volatile Hydrocarbon
X
Solvents
Paint Varnish  
Hydrogen
X
Neutral Solutions
Amines & Nitrates
Bitumen
Oxygen
Concentrated Acids   Synthetic oils
Abrasive media
Recommended
X
Limited Recommendable

(STYLE : HC/SC) HOLLOW CORE / SOLID CORE PACKING

HOLLOW CORE / SOLID COREPACKING
Constructions: A packing with a center of hollow silicon core or solid silicon cord braided around by yarn of style 51, 62, 71, 82 & 83
Applications:
A specially developed packing for use on rotating equipments with excessive shaft deviation. It also reduces shaft / sleeve wear. The center of silicon core / cord gives it strong restoration properties and exerts back-pressure, resulting in total sealing. This packing is suitable for pumps, reactors, mixers, agitators, etc.
Technical Parameters: Temperature Varies according to the packing style
pH Range
Pressure
Shaft Speed

Installation Instructions

Calculation Help


RECOMMENDED SERVICE MEDIAS

Water
Acidic Gas
Concentrated Alkalis
Mineral Oil & Grease
Steam
Volatile Hydrocarbon
Solvents
Paint Varnish
X
Hydrogen
Neutral Solutions
Amines & Nitrates
Bitumen
Oxygen
Concentrated Acids
Synthetic oils
Abrasive media
Recommended
X
Limited Recommendable

(STYLE : PUTTY) PTFE PUTTY / PTFE + GRAPHITE PUTTY

PTFE PUTTY / PTFE GRAPHITE PUTTY
Constructions: A malleable paste made from special grade PTFE or special grade PTFE bonded with high purity Graphite, and a balanced compound of various oils, greases and binders.
Applications: This self-lubricating putty has excellent thermal and chemical resistance, and reduces friction on shafts. It is widely used on scored shafts and valve steam, in pump valves, rectors, agitators, etc. It is recommended to use anti extrusion rings of Style 51, 62, & 71
Technical Parameters: Temperature PTFE PUTTY PTFE + GRAPHITE PUTTY
-100 o C to +260 o C -100 o C to +300 o C
pH Range 0 - 14 0 - 14
Pressure 100 Kg/Cm2 100 Kg/Cm2
Shaft Speed 5 Meters/Second 12 Meters/Second

Installation Instructions

Calculation Help


RECOMMENDED SERVICE MEDIAS

Water
Acidic Gas
X
Concentrated Alkalis   Mineral Oil & Grease
Steam
Volatile Hydrocarbon
X
Solvents
Paint Varnish  
Hydrogen
X
Neutral Solutions
Amines & Nitrates
Bitumen
Oxygen
Concentrated Acids   Synthetic oils
Abrasive media
Recommended
X
Limited Recommendable